Yılmaz, Çağatay and Topal, Serra and Ali, Hafiz Qasim and Tabrizi, Isa Emami and Al-Nadhari, Abdulrahman Saeed Abdulqader and Suleman, Afzal and Yıldız, Mehmet (2020) "Non-destructive determination of the stiffness matrix of a laminated composite structure with lamb wave", Composite Structures, Vol.237 (SCI)
Seyyed Monfared Zanjani, Jamal and
Haghighi Poudeh, Leila and Girginer, Burcu and Yağcı, Yavuz Emre and
Menceloğlu, Yusuf Z. and
Saner Okan, Burcu (2020) "Development of waste tire-derived graphene reinforced polypropylene nanocomposites with controlled polymer grade, crystallization and mechanical characteristics via melt-mixing". Published Online First
http://dx.doi.org/10.1002/pi.6012Li, Mingyang and Kefal, Adnan and Öterkuş, Erkan and Öterkuş, Selda (2020) "Structural health monitoring of an offshore wind turbine tower using iFEM methodology", Ocean Engineering, Vol.204 (SCI)
Özdemir, Murat and Kefal, Adnan and Imachi, Michiya and Tanaka, Satoyuki and Öterkuş, Erkan (2020) "Dynamic fracture analysis of functionally graded materials using ordinary state-based peridynamics", Composite Structures, Vol.244 (SCI)
Li, Mingyang and Kefal, Adnan and Cerik, Burak Can and Öterkuş, Erkan (2020) "Dent damage identification in stiffened cylindrical structures using inverse finite element method", Ocean Engineering, Vol.198 (SCI)
Ertaş Uslu, Merve and Mısırlıoğlu, Burç and Şendur, Kürşat (2020) "Crossover of spectral reflectance lineshapes in Ge-doped VO2 thin films", Optical Materials, Vol.104 (SCI)
Sohouli, A. and
Kefal, Adnan and Abdelhamid, Ahmed and
Yıldız, Mehmet and Suleman, Afzal (2020) "Continuous density-based topology optimization of cracked structures using peridynamics". Published Online First
http://dx.doi.org/10.1007/s00158-020-02608-1Rahimi, Mohammad Naqib and Kefal, Adnan and Yıldız, Mehmet and Öterkuş, Erkan (2020) "An ordinary state-based peridynamic model for toughness enhancement of brittle materials through drilling stop-holes", International Journal of Mechanical Sciences, Vol.182 (SCI)
Alkhateab, Baidaa and Emami Tabrizi, Isa and Seyyed Monfared Zanjani, Jamal and Rahimi, Mohammad Naqib and Haghighi Poudeh, Leila and Kefal, Adnan and Yıldız, Mehmet (2020) "Damage mechanisms in CFRP/HNT laminates under flexural and in-plane shear loadings using experimental and numerical methods", Composites Part A: Applied Science and Manufacturing, Vol.136 (SCI)
Gigax, Jonathan G. and Kim, Hyosim and Aydoğan, Eda and Price, L. M. and Wang, X. and Maloy, S. A. and Garner, F. A. and Shao, L. (2019) "Impact of composition modification induced by ion beam Coulomb-drag effects on the nanoindentation hardness of HT9", Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Vol.444, 68-73 (SCI)
Aydoğan, Eda and Weaver, J. S. and Carvajal-Nunez, U. and Schneider, M. M. and Gigax, J. G. and Krumwiede, D. L. and Hosemann, P. and Saleh, T. A. and Mara, N. A. and Hoelzer, D. T. and Hilton, B. and Maloy, S. A. (2019) "Response of 14YWT alloys under neutron irradiation: A complementary study on microstructure and mechanical properties", Acta Materialia, Vol.167, 181-196 (SCI)
Tunç, Lütfi Taner (2019) "Smart tool path generation for 5-axis ball-end milling of sculptured surfaces
using process models", Robotics and Computer Integrated Manufacturing, Vol.56, 212-221 (SCI)
Seven, Merve Senem and Oğuz, Oğuzhan and Menceloğlu, Yusuf Z. and Atılgan, Canan (2019) "Tuning interaction parameters of thermoplastic polyurethanes in a binary solvent to achieve precise control over microphase separation", Journal of Chemical Information and Modeling (SI), Vol.59, No.5, 1946-1956 (SCI)
Marques, Ricardo and Ünel, Mustafa and Yıldız, Mehmet and Suleman, Afzal (2019) "Remaining useful life prediction of laminated composite materials using thermoelastic stress analysis", Composite Structures, Vol.210, 381-390 (SCI)
Çakal Saraç, Elçin and
Haghighi Poudeh, Leila and
Seyyed Monfared Zanjani, Jamal and Letofsky-Papst, Ilse and
Cebeci, Fevzi Çakmak and Aydın, İsmail and
Menceloğlu, Yusuf Z. and
Saner Okan, Burcu (2019)
"Performance comparison of CVD grown carbon nanofiber based on single- and multi-layer graphene oxides in melt-compounded PA6.6 nanocomposites",
Open Journal of Composite Materials, Vol.9, No.2, 99-123 (NA)
Oğuz, Oğuzhan and Candau, Nicolas and Çıtak, Mehmet Kerem and Çetin, Fatma Nalan and Seven, Merve Senem and Menceloğlu, Yusuf Z. (2019) "A sustainable approach to produce stiff, super-tough, and heat-resistant poly(lactic acid)-based green materials", ACS Sustainable Chemistry and Engineering, Vol.7, No.8, 7869-7877 (SCI)
Şen, Canhan and Aldulaimi, Wael and Mohammad Moradi, Omid and Mısırlıoğlu, Burç (2019) "Loss of spin polarization in ferromagnet/ferroelectric tunnel junctions due
to screening effects", Journal of Physics D: Applied Physics, Vol.52, No.1 (SCI)
Şaş Çaycı, Hatice Sinem and Simacek, Pavel and Advani, Suresh G. (2019) "A methodology to characterize fiber preform permeability by using Kardar-Parisi-Zhang equation", Journal of Porous Media, Vol.22, No.7, 799-811 (SCI)
Çelik, Murat and Çiftçi, Cihan and Eskizeybek, Volkan and Şaş Çaycı, Hatice Sinem (2019) "Numerical characterization of permeability tensor of fiber preforms for liquid composite molding applications", Advanced Science, Engineering and Medicine, Vol.11, No.7, 633-636 (NA)
Nadernezhad, Ali and Ünal, Serkan and Khani, Navid and Koç, Bahattin (2019) "Material extrusion-based additive manufacturing of structurally controlled poly(lactic acid)/carbon nanotube nanocomposites", International Journal of Advanced Manufacturing Technology (SI), Vol.102, No.5-8, 2119-2132 (SCI)
Koç, Bahattin and Acar, Anıl Ahmet and Weightman, Andrew and Cooper, Glen and Blunn, Gordon and Bartolo, Paulo (2019) "Biomanufacturing of customized modular scaffolds for critical bone defects", CIRP Annals - Manufacturing Technology, Vol.68, No.1, 209-212 (SCI)
Daelemans, Lode and Kızıldağ, Nuray and Van Paepegem, Wim and D'hooge, Dagmar R. and De Clerck, Karen (2019) "Interdiffusing core-shell nanofiber interleaved composites for excellent Mode I and Mode II delamination resistance", Composites Science and Technology, Vol.175, 143-150 (SCI)
Nadernezhad, Ali and Çalışkan, Özüm Şehnaz and Topuz, Fuat and Afghah, Seyedeh Ferdows and Erman, Batu and Koç, Bahattin (2019) "Nanocomposite bioinks based on agarose and 2D nanosilicates with tunable flow properties and bioactivity for 3D bioprinting", ACS Applied Bio Materials, Vol.2, No.2, 796-806 (NA)
Atahan, Ali Osman and
Büyük, Murat and Örnek, Murat and Erdem, Musab and Turedi, Yakup (2019) "Determination of optimum post embedment depth for C120 steel posts using field and full scale crash test". Published Online First
http://dx.doi.org/10.1080/13588265.2018.1479499Sharabati, Jalal-Al-Din and Güçlü, Serkan and Erkoç İlter, Selda and İmer, Derya Y. and Ünal, Serkan and Menceloğlu, Yusuf Z. and Öztürk, İzzet and Koyuncu, İsmail (2019) "Interfacially polymerized thin-film composite membranes: impact of support layer pore size on active layer polymerization and seawater desalination performance", Separation and Purification Technology, Vol.212, 438-448 (SCI)
Haghighi Poudeh, Leila and Letofsky-Papst, Ilse and Cebeci, Fevzi Çakmak and Menceloğlu, Yusuf Z. and Yıldız, Mehmet and Saner Okan, Burcu (2019) "Facile synthesis of single- and multi-layer graphene/Mn3O4 integrated 3D urchin-shaped hybrid composite electrodes by core-shell electrospinning", ChemNanoMat, Vol.5, No.6, 792-801 (SCI)
Fatehi, R. and Rahmat, Amin and Tofighi, N. and Yıldız, Mehmet and Shadloo, M. S. (2019) "Density-based smoothed particle hydrodynamics methods for incompressible flows", Computers and Fluids, Vol.185, 22-33 (SCI)
Saffarimiandoab, Farzin and Yavuztürk Gül, Bahar and Erkoç İlter, Selda and Güçlü, Serkan and Ünal, Serkan and Tunaboylu, Bahadır and Menceloğlu, Yusuf Z. and Koyuncu, İsmail (2019) "Evaluation of biofouling behavior of zwitterionic silane coated reverse osmosis membranes fouled by marine bacteria", Progress in Organic Coatings, Vol.134, 303-311 (SCI)
Avaz, Merve Senem and Taştan, Ömer Faruk and Taş, Cüneyt Erdinç and Ünal, Hayriye and İnce, İkbal Agah and Menceloğlu, Yusuf Z. (2019) "Insecticide-releasing LLDPE films as greenhouse cover materials", Materials Today Communications, Vol.19, 170-176 (SCI)
Aydoğan, Eda and Martinez, Enrique and March, Katia and El-Atwani, Osman and Krumwiede, David and Hosemann, Peter and Saleh, Tarik and Maloy, Stuart (2019)
"Alpha ' formation kinetics and radiation induced segregation in neutron irradiated 14YWT nanostructured ferritic alloys",
Scientific Reports, Vol.9 (SCI)
Kefal, Adnan and Haşim, Kazım Ahmet and Yıldız, Mehmet (2019) "A novel isogeometric beam element based on mixed form of refined zigzag theory for thick sandwich and multilayered composite beams", Composites Part B: Engineering, Vol.167, 100-121 (SCI)
Demircan, Özgür and
Yılmaz, Çağatay and
Kocaman, Esat Selim and
Yıldız, Mehmet (2019) "An experimental study on tensile and bending properties of biaxial warp knitted textile composites". Published Online First
http://dx.doi.org/10.1080/09243046.2019.1639016Alcan, Gökhan and
Yılmaz, Emre and
Ünel, Mustafa and
Aran, Volkan and Yılmaz, Metin and Gürel, Çetin and Köprübaşı, Kerem (2019)
"Estimating soot emission in diesel engines using gated recurrent unit networks",
IFAC-PapersOnLine, Vol.52, No.5, 544-549 (CPCI-S)
Çakal Saraç, Elçin and
Haghighi Poudeh, Leila and Monfared Zanjani, Jamal Seyyed and
Pehlivan, Zeki Semih and
Cebeci, Fevzi Çakmak and Aydın, İsmail and
Menceloğlu, Yusuf Z. and
Saner Okan, Burcu (2019) "Nano-engineering of high-performance PA6.6 nanocomposites by the integration of CVD-grown carbon fiber on graphene as a bicomponent reinforcement by melt-compounding". Published Online First
http://dx.doi.org/10.1002/app.48347Tunç, Lütfi Taner and Zatarain, Mikel (2019) "Stability optimal selection of stock shape and tool axis in finishing of thin-wall parts", CIRP Annals - Manufacturing Technology, Vol.68, No.1, 401-404 (SCI)
Ali, Hafiz Qasim and Emami Tabrizi, Isa and Khan, Raja Muhammad Awais and Tufani, Ali and Yıldız, Mehmet (2019) "Microscopic analysis of failure in woven carbon fabric laminates coupled with digital image correlation and acoustic emission", Composite Structures, Vol.230 (SCI)
Kefal, Adnan and Maruccio, Claudio and Quaranta, Giuseppe and Öterkuş, Erkan (2019) "Modelling and parameter identification of electromechanical systems for energy harvesting and sensing", Mechanical Systems and Signal Processing, Vol.121, 890-912 (SCI)
Haşim, Kazım Ahmet and Kefal, Adnan and Madenci, Erdoğan (2019) "Isogeometric plate element for unstiffened and blade stiffened laminates based on refined zigzag theory", Composite Structures, Vol.222 (SCI)
Emami Tabrizi, Isa and Kefal, Adnan and Seyyed Monfared Zanjani, Jamal and Akalın, Çağdaş and Yıldız, Mehmet (2019) "Experimental and numerical investigation on fracture behavior of glass/carbon fiber hybrid composites using acoustic emission method and refined zigzag theory", Composite Structures, Vol.223 (SCI)
Kefal, Adnan (2019) "An efficient curved inverse-shell element for shape sensing and structural health monitoring of cylindrical marine structures", Ocean Engineering, Vol.188 (SCI)
Kefal, Adnan and Sohouli, Abdolrasoul and Öterkuş, Erkan and Yıldız, Mehmet and Suleman, Afzal (2019) "Topology optimization of cracked structures using peridynamics", Continuum Mechanics and Thermodynamics (SI), Vol.31, No.6, 1645-1672 (SCI)
Ormancı-Acar, Türkan and Çelebi, Ferda and Keskin, Başak and Mutlu-Salmanlı, Öykü and Agtas, Meltem and Turken, Türker and Tufani, Ali and İmer, Derya Y. and Özaydın İnce, Gözde and Uçar Demir, Tuğba and Menceloğlu, Yusuf Z. and Ünal, Serkan and Koyuncu, İsmail (2018) "Fabrication and characterization of temperature and pH resistant thin film nanocomposite membranes embedded with halloysite nanotubes for dye rejection", Desalination, Vol.429, 20-32 (SCI)
Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Pappas, Panagiotis-Nektarios and Galiotis, Costas and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2018) "Tailoring viscoelastic response, self-heating and deicing properties of carbon-fiber reinforced epoxy composites by graphene modification", Composites Part A: Applied Science and Manufacturing, Vol.106, 1-10 (SCI)
Dayan, Cem Balda and Afghah, Seyedeh Ferdows and Saner Okan, Burcu and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Çulha, Mustafa and Koç, Bahattin (2018) "Modeling 3D melt electrospinning writing by response surface methodology", Materials & Design, Vol.148, 87-95 (SCI)
Kefal, Adnan and Mayang, Jimmy Bunga and Öterkuş, Erkan and Yıldız, Mehmet (2018) "Three dimensional shape and stress monitoring of bulk carriers based on iFEM methodology", Ocean Engineering, Vol.147, 256-267 (SCI)
Haghighi Poudeh, Leila and Çakıroğlu, Dilek and Cebeci, Fevzi Çakmak and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2018) "Design of Pt-supported 1D and 3D multilayer graphene-based structural composite electrodes with controlled morphology by core-shell electrospinning/electrospraying", ACS Omega, Vol.3, No.6, 6400-6410 (SCI)
Rahmat, Amin and Yıldız, Mehmet (2018) "A multiphase ISPH method for simulation of droplet coalescence and electro-coalescence", International Journal of Multiphase Flow, Vol.105, 32-44 (SCI)
Seyyed Monfared Zanjani, Jamal and Al-Nadhari, Abdulrahman Saeed Abdulqader and Yıldız, Mehmet (2018) "Manufacturing of electroactive morphing carbon fiber/glass fiber/epoxy composite: process and structural monitoring by FBG sensors", Thin-Walled Structures, Vol.130, 458-466 (SCI)
Demir, Eralp and Mercan, Safiye Canset (2018) "A physics-based single crystal plasticity model for crystal orientation and
length scale dependence of machining response", International Journal of Machine Tools and Manufacture, Vol.134, 25-41 (SCI)
Sohouli, A. and Yıldız, Mehmet and Suleman, Afzal (2018) "Cost analysis of variable stiffness composite structures with application to a wind turbine blade", Composite Structures, Vol.203, 681-695 (SCI)
Tunç, Lütfi Taner and Özşahin, Orkun (2018) "Use of inverse stability solutions for identification of uncertainties
in the dynamics of machining processes". Published Online First
http://dx.doi.org/10.1007%2Fs40436-018-0233-x Tunç, Lütfi Taner (2018) "Prediction of tool tip dynamics for generalized milling cutters using the 3D model of the tool body", International Journal of Advanced Manufacturing Technology, Vol.95, No.5-8, 1891-1909 (SCI)
Shakoorioskooie, Mahdieh and Menceloğlu, Yusuf Z. and Ünal, Serkan and Hayat Soytaş, Serap (2018) "Rapid microwave-assisted synthesis of platinum nanoparticles immobilized in electrospun carbon nanofibers for electrochemical catalysis", ACS Applied Nano Materials, Vol.1, No.11, 6236-6246 (ESCI)
Güçlü, Serkan and Sharabati, Jalal-Al-Din and Saffarimiandoab, Farzin and Ağtaş, Meltem and İmer, Derya Y. and Paşaoğlu, Mehmet E. and
Menceloğlu, Yusuf Z. and
Ünal, Serkan and Koyuncu, İsmail (2018)
"Investigation of pilot scale manufacturing of polysulfone (PSf) membranes by wet phase inversion method",
Desalination and Water Treatment, Vol.131, 66-74 (SCI)
Büyük, Murat and Atahan, Ali Osman and Kurucuoğlu, Kenan (2018) "Impact performance evaluation of a crash cushion design using finite element simulation and full-scale crash testing", Safety, Vol.4, No.4 (ESCI)
Sohouli, A. and Yıldız, Mehmet and Suleman, A. (2017) "Design optimization of thin-walled composite structures based on material and fiber orientation", Composite Structures, Vol.176, 1081-1095 (SCI)
Kefal, Adnan and Yıldız, Mehmet (2017) "Modeling of sensor placement strategy for shape sensing and structural health monitoring of a wing-shaped sandwich panel using inverse finite element method", Sensors, Vol.17, No.12 (SCI)
Kefal, Adnan and Tessler, Alexander and Öterkuş, Erkan (2017) "An enhanced inverse finite element method for displacement and stress monitoring of multilayered composite and sandwich structures", Composite Structures, Vol.179, 514-540 (SCI)
Yıldız, Mehmet and Ali, Hafiz Qasim and Emami Tabrizi, Isa and Khan, Raja Muhammad Awais and Haghighi Poudeh, Leila () "Experimental study on dynamic behavior of woven carbon fabric laminates using in-house piezoelectric sensors", Smart Materials and Structures (SCI)