• Article
    Kefal, Adnan and Öterkuş, Erkan (2020) "Isogeometric iFEM analysis of thin shell structures", Sensors, Vol.20, No.9 (SCI)
    Mohammadjafari Sadeghi, Hadi and Mohammadpour, Mojtaba and Babayan, Morsal and Sojoudi, Atta and Chamkha, Ali J. (2020) "Unsteady natural convection of water adjacent to the sidewall of a differentially heated cavity with multiple fins", International Communications in Heat and Mass Transfer, Vol.116 (SCI)
    Yılmaz, Çağatay and Topal, Serra and Ali, Hafiz Qasim and Tabrizi, Isa Emami and Al-Nadhari, Abdulrahman Saeed Abdulqader and Suleman, Afzal and Yıldız, Mehmet (2020) "Non-destructive determination of the stiffness matrix of a laminated composite structure with lamb wave", Composite Structures, Vol.237 (SCI)
    Li, Mingyang and Kefal, Adnan and Öterkuş, Erkan and Öterkuş, Selda (2020) "Structural health monitoring of an offshore wind turbine tower using iFEM methodology", Ocean Engineering, Vol.204 (SCI)
    Özdemir, Murat and Kefal, Adnan and Imachi, Michiya and Tanaka, Satoyuki and Öterkuş, Erkan (2020) "Dynamic fracture analysis of functionally graded materials using ordinary state-based peridynamics", Composite Structures, Vol.244 (SCI)
    Li, Mingyang and Kefal, Adnan and Cerik, Burak Can and Öterkuş, Erkan (2020) "Dent damage identification in stiffened cylindrical structures using inverse finite element method", Ocean Engineering, Vol.198 (SCI)
    Ertaş Uslu, Merve and Mısırlıoğlu, Burç and Şendur, Kürşat (2020) "Crossover of spectral reflectance lineshapes in Ge-doped VO2 thin films", Optical Materials, Vol.104 (SCI)
    Sohouli, A. and Kefal, Adnan and Abdelhamid, Ahmed and Yıldız, Mehmet and Suleman, Afzal (2020) "Continuous density-based topology optimization of cracked structures using peridynamics". Published Online First http://dx.doi.org/10.1007/s00158-020-02608-1
    Rahimi, Mohammad Naqib and Kefal, Adnan and Yıldız, Mehmet and Öterkuş, Erkan (2020) "An ordinary state-based peridynamic model for toughness enhancement of brittle materials through drilling stop-holes", International Journal of Mechanical Sciences, Vol.182 (SCI)
    Alkhateab, Baidaa and Emami Tabrizi, Isa and Seyyed Monfared Zanjani, Jamal and Rahimi, Mohammad Naqib and Haghighi Poudeh, Leila and Kefal, Adnan and Yıldız, Mehmet (2020) "Damage mechanisms in CFRP/HNT laminates under flexural and in-plane shear loadings using experimental and numerical methods", Composites Part A: Applied Science and Manufacturing, Vol.136 (SCI)
    Abdollahzadeh, Mohammadamin and Kefal, Adnan and Yıldız, Mehmet (2020) "A comparative and review study on shape and stress sensing of flat/curved shell geometries using C0-continuous family of iFEM elements", Sensors, Vol.20, No.14 (SCI)
    Kefal, Adnan (2020) "A novel four-node inverse-plate element for shape and stress sensing of laminated composite and sandwich plates", Journal of the Faculty of Engineering and Architecture of Gazi University, Vol.35, No.4, 1767-1781 (SCI)
    Berktaş, İlayda and Hezarkhani, Marjan and Haghighi Poudeh, Leila and Saner Okan, Burcu (2020) "Recent developments in the synthesis of graphene and graphene-like structures from waste sources by recycling and upcycling technologies: a review". Published Online First http://dx.doi.org/10.1007/s41127-020-00033-1
    Beylergil, Bertan and Emami Tabrizi, Isa and Seyyed Monfared Zanjani, Jamal and Saeidiharzand, Shaghayegh and Haghighi Poudeh, Leila and Yıldız, Mehmet (2020) "Experimental failure analysis and mechanical performance evaluation of fiber-metal sandwich laminates interleaved with polyamide-6,6 interlayers through the combined usage of acoustic emission, thermography and microscopy techniques". Published Online First http://dx.doi.org/10.1177/1099636220924654
    Seyyed Monfared Zanjani, Jamal and Haghighi Poudeh, Leila and Girginer Özünlü, Burcu and Yağcı, Yavuz Emre and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2020) "Development of waste tire-derived graphene reinforced polypropylene nanocomposites with controlled polymer grade, crystallization and mechanical characteristics via melt-mixing", Polymer International, Vol.69, No.9, 771-779 (SCI)
    Seviniş Özbulut, Emine Billur and Seven, Merve Senem and Bilge, Kaan and Akkaş, Tuğçe and Taş, Cüneyt Erdinç and Yıldız, Burçin and Atılgan, Canan and Menceloğlu, Yusuf Z. and Ünal, Serkan (2020) "Blends of highly branched and linear poly(arylene ether sulfone)s: multiscale effect of the degree of branching on the morphology and mechanical properties", Polymer, Vol.188 (SCI)
    Kolukısa, Deniz Can and Özbulut, Murat and Peşman, Emre and Yıldız, Mehmet (2020) "Development of computationally efficient augmented Lagrangian SPH for incompressible flows and its quantitative comparison with WCSPH simulating flow past a circular cylinder", International Journal for Numerical Methods in Engineering, Vol.121, No.18, 4187-4207 (SCI)
    Gigax, Jonathan G. and Kim, Hyosim and Aydoğan, Eda and Price, L. M. and Wang, X. and Maloy, S. A. and Garner, F. A. and Shao, L. (2019) "Impact of composition modification induced by ion beam Coulomb-drag effects on the nanoindentation hardness of HT9", Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Vol.444, 68-73 (SCI)
    Aydoğan, Eda and Weaver, J. S. and Carvajal-Nunez, U. and Schneider, M. M. and Gigax, J. G. and Krumwiede, D. L. and Hosemann, P. and Saleh, T. A. and Mara, N. A. and Hoelzer, D. T. and Hilton, B. and Maloy, S. A. (2019) "Response of 14YWT alloys under neutron irradiation: A complementary study on microstructure and mechanical properties", Acta Materialia, Vol.167, 181-196 (SCI)
    Tunç, Lütfi Taner (2019) "Smart tool path generation for 5-axis ball-end milling of sculptured surfaces using process models", Robotics and Computer Integrated Manufacturing, Vol.56, 212-221 (SCI)
    Seven, Merve Senem and Oğuz, Oğuzhan and Menceloğlu, Yusuf Z. and Atılgan, Canan (2019) "Tuning interaction parameters of thermoplastic polyurethanes in a binary solvent to achieve precise control over microphase separation", Journal of Chemical Information and Modeling (SI), Vol.59, No.5, 1946-1956 (SCI)
    Verl, Alexander and Valente, Anna and Melkote, Shreyes and Brecher, Christian and Öztürk, Erdem and Tunç, Lütfi Taner (2019) "Robots in machining". Published Online First http://dx.doi.org/10.1016/j.cirp.2019.05.009
    Tunç, Lütfi Taner (2019) "Effect of MQL conditions on tool life in milling of AISI 316L stainless steel", Journal of the Faculty of Engineering and Architecture of Gazi University, Vol.34, No.4, 1665-1677 (SCI)
    Marques, Ricardo and Ünel, Mustafa and Yıldız, Mehmet and Suleman, Afzal (2019) "Remaining useful life prediction of laminated composite materials using thermoelastic stress analysis", Composite Structures, Vol.210, 381-390 (SCI)
    Çakal Saraç, Elçin and Haghighi Poudeh, Leila and Seyyed Monfared Zanjani, Jamal and Letofsky-Papst, Ilse and Cebeci, Fevzi Çakmak and Aydın, İsmail and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2019) "Performance comparison of CVD grown carbon nanofiber based on single- and multi-layer graphene oxides in melt-compounded PA6.6 nanocomposites", Open Journal of Composite Materials, Vol.9, No.2, 99-123 (NA)
    Oğuz, Oğuzhan and Candau, Nicolas and Çıtak, Mehmet Kerem and Çetin, Fatma Nalan and Seven, Merve Senem and Menceloğlu, Yusuf Z. (2019) "A sustainable approach to produce stiff, super-tough, and heat-resistant poly(lactic acid)-based green materials", ACS Sustainable Chemistry and Engineering, Vol.7, No.8, 7869-7877 (SCI)
    Şen, Canhan and Aldulaimi, Wael and Mohammad Moradi, Omid and Mısırlıoğlu, Burç (2019) "Loss of spin polarization in ferromagnet/ferroelectric tunnel junctions due to screening effects", Journal of Physics D: Applied Physics, Vol.52, No.1 (SCI)
    Şaş Çaycı, Hatice Sinem and Simacek, Pavel and Advani, Suresh G. (2019) "A methodology to characterize fiber preform permeability by using Kardar-Parisi-Zhang equation", Journal of Porous Media, Vol.22, No.7, 799-811 (SCI)
    Alkan Taş, Buket and Şehit, Ekin and Taş, Cüneyt Erdinç and Ünal, Serkan and Cebeci, Fevzi Çakmak and Menceloğlu, Yusuf Z. and Ünal, Hayriye (2019) "Carvacrol loaded halloysite coatings for antimicrobial food packaging applications", Food Packaging and Shelf Life, Vol.20 (SCI)
    Çelik, Murat and Çiftçi, Cihan and Eskizeybek, Volkan and Şaş Çaycı, Hatice Sinem (2019) "Numerical characterization of permeability tensor of fiber preforms for liquid composite molding applications", Advanced Science, Engineering and Medicine, Vol.11, No.7, 633-636 (NA)
    Nadernezhad, Ali and Ünal, Serkan and Khani, Navid and Koç, Bahattin (2019) "Material extrusion-based additive manufacturing of structurally controlled poly(lactic acid)/carbon nanotube nanocomposites", International Journal of Advanced Manufacturing Technology (SI), Vol.102, No.5-8, 2119-2132 (SCI)
    Koç, Bahattin and Acar, Anıl Ahmet and Weightman, Andrew and Cooper, Glen and Blunn, Gordon and Bartolo, Paulo (2019) "Biomanufacturing of customized modular scaffolds for critical bone defects", CIRP Annals - Manufacturing Technology, Vol.68, No.1, 209-212 (SCI)
    Daelemans, Lode and Kızıldağ, Nuray and Van Paepegem, Wim and D'hooge, Dagmar R. and De Clerck, Karen (2019) "Interdiffusing core-shell nanofiber interleaved composites for excellent Mode I and Mode II delamination resistance", Composites Science and Technology, Vol.175, 143-150 (SCI)
    Nadernezhad, Ali and Çalışkan, Özüm Şehnaz and Topuz, Fuat and Afghah, Seyedeh Ferdows and Erman, Batu and Koç, Bahattin (2019) "Nanocomposite bioinks based on agarose and 2D nanosilicates with tunable flow properties and bioactivity for 3D bioprinting", ACS Applied Bio Materials, Vol.2, No.2, 796-806 (NA)
    Aydoğan, Eda and Rietema, Connor J. and Carvajal-Nunez, Ursula and Vogel, Sven C. and Li, Meimei and Maloy, Stuart A. (2019) "Effect of high-density nanoparticles on recrystallization and texture evolution in ferritic alloys", Crystals, Vol.9, No.3 (SCI)
    Atahan, Ali Osman and Büyük, Murat and Örnek, Murat and Erdem, Musab and Turedi, Yakup (2019) "Determination of optimum post embedment depth for C120 steel posts using field and full scale crash test". Published Online First http://dx.doi.org/10.1080/13588265.2018.1479499
    Alcan, Gökhan and Ünel, Mustafa and Aran, Volkan and Yılmaz, Metin and Gürel, Çetin and Köprübaşı, Kerem (2019) "Predicting NOx emissions in diesel engines via sigmoid NARX models using a new experiment design for combustion identification", Measurement, Vol.137, 71-81 (SCI)
    Sharabati, Jalal-Al-Din and Güçlü, Serkan and Erkoç İlter, Selda and İmer, Derya Y. and Ünal, Serkan and Menceloğlu, Yusuf Z. and Öztürk, İzzet and Koyuncu, İsmail (2019) "Interfacially polymerized thin-film composite membranes: impact of support layer pore size on active layer polymerization and seawater desalination performance", Separation and Purification Technology, Vol.212, 438-448 (SCI)
    Haghighi Poudeh, Leila and Letofsky-Papst, Ilse and Cebeci, Fevzi Çakmak and Menceloğlu, Yusuf Z. and Yıldız, Mehmet and Saner Okan, Burcu (2019) "Facile synthesis of single- and multi-layer graphene/Mn3O4 integrated 3D urchin-shaped hybrid composite electrodes by core-shell electrospinning", ChemNanoMat, Vol.5, No.6, 792-801 (SCI)
    Evren Han, Sanem and Ünel, Mustafa (2019) "An acceleration-based hybrid learning-adaptive controller for robot manipulators", Transactions of the Institute of Measurement and Control (SI), Vol.41, No.8, 2114-2123 (SCI)
    Fatehi, R. and Rahmat, Amin and Tofighi, N. and Yıldız, Mehmet and Shadloo, M. S. (2019) "Density-based smoothed particle hydrodynamics methods for incompressible flows", Computers and Fluids, Vol.185, 22-33 (SCI)
    Saffarimiandoab, Farzin and Yavuztürk Gül, Bahar and Erkoç İlter, Selda and Güçlü, Serkan and Ünal, Serkan and Tunaboylu, Bahadır and Menceloğlu, Yusuf Z. and Koyuncu, İsmail (2019) "Evaluation of biofouling behavior of zwitterionic silane coated reverse osmosis membranes fouled by marine bacteria", Progress in Organic Coatings, Vol.134, 303-311 (SCI)
    Avaz, Merve Senem and Taştan, Ömer Faruk and Taş, Cüneyt Erdinç and Ünal, Hayriye and İnce, İkbal Agah and Menceloğlu, Yusuf Z. (2019) "Insecticide-releasing LLDPE films as greenhouse cover materials", Materials Today Communications, Vol.19, 170-176 (SCI)
    Aydoğan, Eda and Martinez, Enrique and March, Katia and El-Atwani, Osman and Krumwiede, David and Hosemann, Peter and Saleh, Tarik and Maloy, Stuart (2019) "Alpha ' formation kinetics and radiation induced segregation in neutron irradiated 14YWT nanostructured ferritic alloys", Scientific Reports, Vol.9 (SCI)
    Kefal, Adnan and Haşim, Kazım Ahmet and Yıldız, Mehmet (2019) "A novel isogeometric beam element based on mixed form of refined zigzag theory for thick sandwich and multilayered composite beams", Composites Part B: Engineering, Vol.167, 100-121 (SCI)
    Demircan, Özgür and Yılmaz, Çağatay and Kocaman, Esat Selim and Yıldız, Mehmet (2019) "An experimental study on tensile and bending properties of biaxial warp knitted textile composites". Published Online First http://dx.doi.org/10.1080/09243046.2019.1639016
    Tofighi, Nima and Özbulut, Murat and Suleman, A. and Feng, J. J. and Yıldız, Mehmet (2019) "Dielectrophoretic interaction of circular particles in a uniform electric field". Published Online First http://dx.doi.org/10.1016/j.euromechflu.2019.07.002
    Alcan, Gökhan and Yılmaz, Emre and Ünel, Mustafa and Aran, Volkan and Yılmaz, Metin and Gürel, Çetin and Köprübaşı, Kerem (2019) "Estimating soot emission in diesel engines using gated recurrent unit networks", IFAC-PapersOnLine, Vol.52, No.5, 544-549 (CPCI-S)
    Çakal Saraç, Elçin and Haghighi Poudeh, Leila and Monfared Zanjani, Jamal Seyyed and Pehlivan, Zeki Semih and Cebeci, Fevzi Çakmak and Aydın, İsmail and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2019) "Nano-engineering of high-performance PA6.6 nanocomposites by the integration of CVD-grown carbon fiber on graphene as a bicomponent reinforcement by melt-compounding". Published Online First http://dx.doi.org/10.1002/app.48347
    Tunç, Lütfi Taner and Zatarain, Mikel (2019) "Stability optimal selection of stock shape and tool axis in finishing of thin-wall parts", CIRP Annals - Manufacturing Technology, Vol.68, No.1, 401-404 (SCI)
    Ali, Hafiz Qasim and Emami Tabrizi, Isa and Khan, Raja Muhammad Awais and Tufani, Ali and Yıldız, Mehmet (2019) "Microscopic analysis of failure in woven carbon fabric laminates coupled with digital image correlation and acoustic emission", Composite Structures, Vol.230 (SCI)
    Kefal, Adnan and Maruccio, Claudio and Quaranta, Giuseppe and Öterkuş, Erkan (2019) "Modelling and parameter identification of electromechanical systems for energy harvesting and sensing", Mechanical Systems and Signal Processing, Vol.121, 890-912 (SCI)
    Haşim, Kazım Ahmet and Kefal, Adnan and Madenci, Erdoğan (2019) "Isogeometric plate element for unstiffened and blade stiffened laminates based on refined zigzag theory", Composite Structures, Vol.222 (SCI)
    Emami Tabrizi, Isa and Kefal, Adnan and Seyyed Monfared Zanjani, Jamal and Akalın, Çağdaş and Yıldız, Mehmet (2019) "Experimental and numerical investigation on fracture behavior of glass/carbon fiber hybrid composites using acoustic emission method and refined zigzag theory", Composite Structures, Vol.223 (SCI)
    Kefal, Adnan (2019) "An efficient curved inverse-shell element for shape sensing and structural health monitoring of cylindrical marine structures", Ocean Engineering, Vol.188 (SCI)
    Kefal, Adnan and Sohouli, Abdolrasoul and Öterkuş, Erkan and Yıldız, Mehmet and Suleman, Afzal (2019) "Topology optimization of cracked structures using peridynamics", Continuum Mechanics and Thermodynamics (SI), Vol.31, No.6, 1645-1672 (SCI)
    Ormancı-Acar, Türkan and Çelebi, Ferda and Keskin, Başak and Mutlu-Salmanlı, Öykü and Agtas, Meltem and Turken, Türker and Tufani, Ali and İmer, Derya Y. and Özaydın İnce, Gözde and Uçar Demir, Tuğba and Menceloğlu, Yusuf Z. and Ünal, Serkan and Koyuncu, İsmail (2018) "Fabrication and characterization of temperature and pH resistant thin film nanocomposite membranes embedded with halloysite nanotubes for dye rejection", Desalination, Vol.429, 20-32 (SCI)
    Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Pappas, Panagiotis-Nektarios and Galiotis, Costas and Menceloğlu, Yusuf Z. and Yıldız, Mehmet (2018) "Tailoring viscoelastic response, self-heating and deicing properties of carbon-fiber reinforced epoxy composites by graphene modification", Composites Part A: Applied Science and Manufacturing, Vol.106, 1-10 (SCI)
    Dayan, Cem Balda and Afghah, Seyedeh Ferdows and Saner Okan, Burcu and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Çulha, Mustafa and Koç, Bahattin (2018) "Modeling 3D melt electrospinning writing by response surface methodology", Materials & Design, Vol.148, 87-95 (SCI)
    Kefal, Adnan and Mayang, Jimmy Bunga and Öterkuş, Erkan and Yıldız, Mehmet (2018) "Three dimensional shape and stress monitoring of bulk carriers based on iFEM methodology", Ocean Engineering, Vol.147, 256-267 (SCI)
    Haghighi Poudeh, Leila and Çakıroğlu, Dilek and Cebeci, Fevzi Çakmak and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Saner Okan, Burcu (2018) "Design of Pt-supported 1D and 3D multilayer graphene-based structural composite electrodes with controlled morphology by core-shell electrospinning/electrospraying", ACS Omega, Vol.3, No.6, 6400-6410 (SCI)
    Rahmat, Amin and Yıldız, Mehmet (2018) "A multiphase ISPH method for simulation of droplet coalescence and electro-coalescence", International Journal of Multiphase Flow, Vol.105, 32-44 (SCI)
    Seyyed Monfared Zanjani, Jamal and Al-Nadhari, Abdulrahman Saeed Abdulqader and Yıldız, Mehmet (2018) "Manufacturing of electroactive morphing carbon fiber/glass fiber/epoxy composite: process and structural monitoring by FBG sensors", Thin-Walled Structures, Vol.130, 458-466 (SCI)
    Demir, Eralp and Mercan, Safiye Canset (2018) "A physics-based single crystal plasticity model for crystal orientation and length scale dependence of machining response", International Journal of Machine Tools and Manufacture, Vol.134, 25-41 (SCI)
    Sohouli, A. and Yıldız, Mehmet and Suleman, Afzal (2018) "Cost analysis of variable stiffness composite structures with application to a wind turbine blade", Composite Structures, Vol.203, 681-695 (SCI)
    Tunç, Lütfi Taner (2018) "Prediction of tool tip dynamics for generalized milling cutters using the 3D model of the tool body", International Journal of Advanced Manufacturing Technology, Vol.95, No.5-8, 1891-1909 (SCI)
    Shakoorioskooie, Mahdieh and Menceloğlu, Yusuf Z. and Ünal, Serkan and Hayat Soytaş, Serap (2018) "Rapid microwave-assisted synthesis of platinum nanoparticles immobilized in electrospun carbon nanofibers for electrochemical catalysis", ACS Applied Nano Materials, Vol.1, No.11, 6236-6246 (ESCI)
    Güçlü, Serkan and Sharabati, Jalal-Al-Din and Saffarimiandoab, Farzin and Ağtaş, Meltem and İmer, Derya Y. and Paşaoğlu, Mehmet E. and Menceloğlu, Yusuf Z. and Ünal, Serkan and Koyuncu, İsmail (2018) "Investigation of pilot scale manufacturing of polysulfone (PSf) membranes by wet phase inversion method", Desalination and Water Treatment, Vol.131, 66-74 (SCI)
    Büyük, Murat and Atahan, Ali Osman and Kurucuoğlu, Kenan (2018) "Impact performance evaluation of a crash cushion design using finite element simulation and full-scale crash testing", Safety, Vol.4, No.4 (ESCI)
    Sohouli, A. and Yıldız, Mehmet and Suleman, A. (2017) "Design optimization of thin-walled composite structures based on material and fiber orientation", Composite Structures, Vol.176, 1081-1095 (SCI)
    Kefal, Adnan and Yıldız, Mehmet (2017) "Modeling of sensor placement strategy for shape sensing and structural health monitoring of a wing-shaped sandwich panel using inverse finite element method", Sensors, Vol.17, No.12 (SCI)
    Kefal, Adnan and Tessler, Alexander and Öterkuş, Erkan (2017) "An enhanced inverse finite element method for displacement and stress monitoring of multilayered composite and sandwich structures", Composite Structures, Vol.179, 514-540 (SCI)
    Cakal Sarac, Elçin and Haghighi Poudeh, Leila and Berktaş, İlayda and Saner Okan, Burcu () "Scalable fabrication of high-performance Graphene/Polyamide 66 nanocomposites with controllable surface chemistry by melt compounding", Applied Polymer Science ()
    Yıldız, Mehmet and Ali, Hafiz Qasim and Emami Tabrizi, Isa and Khan, Raja Muhammad Awais and Haghighi Poudeh, Leila () "Experimental study on dynamic behavior of woven carbon fabric laminates using in-house piezoelectric sensors", Smart Materials and Structures (SCI)
  • Book Section / Chapter
    Seyyed Monfared Zanjani, Jamal and Beylergil, Bertan and Haghighi Poudeh, Leila and Alkhateab, Baidaa and Menceloğlu, Yusuf Z. and Yıldız, Mehmet, "Effect of nanomaterials/nanofibers on the structure and properties of fiber-reinforced composites", Fiber-Reinforced Nanocomposites: Fundamentals and Applications, Han, Baoguo and Sharma, Sumit and Nguyen, Tuan Anh and Longbiao, Li and Bhat, K. Subrahmanya (eds.), Amsterdam: Elsevier, 2020, 157-182
    Seyyed Monfared Zanjani, Jamal and Oğuz, Oğuzhan and Saner Okan, Burcu and Yıldız, Mehmet and Menceloğlu, Yusuf Z., "Polymer composites containing functionalized nanoparticles and the environment", Polymer Composites with Functionalized Nanoparticles: Synthesis, Properties, and Applications, Pielichowski, Krzysztof and Majka, Tomasz (eds.), Amsterdam: Elsevier, 2019, 437-466
    Haghighi Poudeh, Leila and Yıldız, Mehmet and Menceloğlu, Yusuf Z. and Saner Okan, Burcu, "Three-dimensional graphene-based structures: production methods, properties, and applications", Handbook of Graphene: Growth, Synthesis, and Functionalization, Celasco, Edvige and Chaika, Alexander N. (eds.), USA: Wiley-Scrivener, 2019, 359-387
    Seyyed Monfared Zanjani, Jamal and Saner Okan, Burcu and Menceloğlu, Yusuf Z. and Yıldız, Mehmet, "Self-healing thermosetting composites: concepts, chemistry and future advances", Hybrid Organic‐Inorganic Interfaces: Towards Advanced Functional Materials, Delville, Marie-Helene and Taubert, Andreas (eds.), UK: Wiley, 2018
  • Papers in Conference Proceedings
    Çakal Saraç, Elçin and Haghighi Poudeh, Leila and Seyyed Monfared Zanjani, Jamal and Cebeci, Fevzi Çakmak and Aydın, İsmail and Menceloğlu, Yusuf Z. and Saner Okan, Burcu, "New hybrid nano additives for thermoplastic compounding: CVD grown carbon fiber on graphene", Cebeci, F. C. and Menceloğlu, Y. Z. and Ünal, S. and Ulcer, Y. (eds.), 35th International Conference of the Polymer Processing Society (PPS), American Institute of Physics, 2020
    Rahimi, Mohammad Naqib and Kefal, Adnan and Yıldız, Mehmet, "Numerical investigation on effective toughening mechanisms of graded composites", Joint Event: ICCS23 - 23rd International Conference on Composite Structures & MECHCOMP6 - 6th International Conference on Mechanics of Composites, University of Porto, 2020
    Gönül, Bora and Sapmaz, Ömer Faruk and Tunç, Lütfi Taner, "Improved stable conditions in robotic milling by kinematic redundancy", Mcleay, Tom and Öztürk, Erdem and Msaoubi, Rachid (eds.), 17th CIRP Conference on Modelling of Machining Operations, Elsevier, 2019, 485-490
    Ramezanzadeh, Shayan and Özbulut, M. and Yıldız, Mehmet, "Simulation of irregular wave motion using a flap-type wavemaker", Bensow, R. and Ringsberg, J. (eds.), VIII. International Conference on Computational Methods in Marine Engineering (MARINE 2019), International Centre for Numerical Methods in Engineering, 2019, 771-782
    Emami Tabrizi, Isa and Seyyed Monfared Zanjani, Jamal and Akalın, Çağdaş and Yıldız, Mehmet, "Acoustic emission monitoring of glass/carbon hybrid fiber/epoxy composites under flexural and tensile loading conditions", 5th International Conference on Mechanics of Composites (MECHCOMP), University of Porto, 2019
    Sohouli, Abdolrasoul and Kefal, Adnan and Yıldız, Mehmet and Suleman, Afzal, "Multi-material topology optimization of structures using peridynamics", 30th International Conference on Adaptive Structures and Technologies (ICAST2019), Concordia University, 2019
    Vrabic, Rok and Kozjek, Dominik and Öztürk, Erdem and Tunç, Lütfi Taner and Malus, Andreja and Butala, Peter, "Identification of the CIRP expertise network based on public data", Kjellberg, T. and Wang, L. and Ji, W. and Wang, X. V. (eds.), 51st CIRP Conference on Manufacturing Systems, Elsevier, 2018, 165-168
    Zaki, Hammad and Ünel, Mustafa, "Control of a hovering quadrotor UAV subject to periodic disturbances", Arısoy, D. O. and Engin, S. N. and Oz, M. A. (eds.), 6th International Conference on Control Engineering & Information Technology (CEIT), IEEE (Institute of Electrical and Electronics Engineers), 2018
    Nadernezhad, Ali and Çalışkan, Özüm Şehnaz and Koç, Bahattin, "Nanocomposite hydrogels of agarose/nanosilicates for 3D bioprinting applications", Biofabrication Conference 2018, Wurzberg, Germany: ISBF (International Society for Biofabrication), 2018
    Akdeniz Skvortsov, Gözde and Piluso, Susanna and Altunbek, Mine and Khani, Navid and Oosterwyck, Hans Van and Ferraris, Eleonora and Patterson, Jennifer and Koç, Bahattin, "3D bioprinting of cell-laden molecularly engineered PEG-based hydrogels", Biofabrication Conference 2018, Wurzberg, Germany: ISBF (International Society for Biofabrication), 2018
    Yılmaz, C. and Akalın, C. and Günal, I. and Çelik, H. and Büyük, M. and Suleman, A. and Yıldız, Mehmet, "Observation of damage accumulation under in-plane shear loading", Specialists' Meeting AVT-305 on Sensing Systems for Integrated Vehicle Health Management (IVHM) of Military Vehicles (NATO STO AVT-305), NATO Science & Technology Organization, 2018
    Kefal, Adnan and Haşim, Ahmet Kazım and Yıldız, Mehmet, "Isogeometric analysis of moderately thick composite beams and plates based on refined zigzag theory", 28th International Workshop on Computational Mechanics of Materials (IWCMM), University of Strathclyde, 2018
    Kefal, Adnan and Sohouli, A. and Öterkuş, E. and Yıldız, Mehmet and Suleman, A., "Topology optimization of cracked structures using peridynamics", 28th International Workshop on Computational Mechanics of Materials (IWCMM), University of Strathclyde, 2018
    Madenci, Erdoğan and Kefal, Adnan and Dördüncü, Mehmet and Barut, Atila and Yıldız, Mehmet, "Isogeometric analysis using peridynamics and XFEM", 59th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, American Institute of Aeronautics and Astronautics, 2018
    Özcan, Yiğit and Tunç, Lütfi Taner, "Investigation of surface mophology and integrity in multi axis abrasive waterjet machining (AWJM)", International Symposium on Machining,, 2018
    Sapmaz, Ömer Faruk and Tunç, Lütfi Taner, "Kinematic based selection of the workpiece location in robotic milling", International Symposium on Machining,, 2018
    Tunç, Lütfi Taner and Sapmaz, Ömer Faruk, "Challenges for industrial robots towards milling applications", 8th International Symposium on Machining (UTIS 2017), UTIS, 2017
    Kefal, Adnan and Yıldız, Mehmet and Öterkuş, E., "Structural health monitoring of a wing-shaped sandwich panel using iFEM-RZT methodology", 3rd Turkey-Japan Workshop (TJW) on Polymeric Composite Materials, Sabanci University, 2017
    Sapmaz, Ömer Faruk and Tunç, Lütfi Taner, "Tool axis optimization for robotic 5-axis milling considering kinematics", 14th Conference on High Speed Machining Conference, Procedia CIRP
    Bilal, Diyar Khalis and Ünel, Mustafa and Tunç, Lütfi Taner, "Improved vision based pose estimation for industrial robots via sparse regression", 2020 International Conference on Intelligent Computing, Springer